Zendrum Forums

Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 ... 4 5 [6] 7 8 ... 10
 on: August 07, 2015, 03:24:30 PM 
Started by DottySwain - Last post by DottySwain
She is also something special for me to clean when you're keo chau a tran crb vs nautico on the trot.

Also visit my blog post ... dd ti so bong da AD Municipal Liberia vs CS Uruguay

 on: July 23, 2015, 04:32:55 PM 
Started by Mr. Wayne - Last post by Mr. Wayne
Update: My EXP just arrived today 7/23 and my first impressions when I took it out of the Gig bag was "WOW" over and over again. This thing is so stunningly gorgeous I don't want to touch it and get fingerprints on it. I must thank David Haney for going above and beyond on my setup which was quite challenging. It took some unorthodox internal wiring to the EXP. Next step order my Laptop.

 on: June 19, 2015, 07:22:29 PM 
Started by Mr. Wayne - Last post by Mr. Wayne
Hello fellow Zendrummers I'm new to this forum and I find the info here very useful. I just ordered a Honey Burst EXP last week and the excitement is keeping me awake at night. David Haney was so so helpful in answering all my questions and I'm sure I won't be disappointed.

 on: June 18, 2015, 11:29:56 PM 
Started by RockSteady - Last post by DrumWagon
"The waaaiting is the hardest part".

Welcome to the tribe :)

 on: June 18, 2015, 07:03:46 PM 
Started by RockSteady - Last post by RockSteady
Pulled the trigger for a beautiful EXP today! Now... the wait begins. ;-)

 on: June 14, 2015, 02:37:39 PM 
Started by Ronnie Balz - Last post by Ronnie Balz
Thanks for the quick reply.  I'm maybe not being clear or I'm misunderstanding your reply.  I'm not talking about somehow turning the midi out into a midi in, I'm talking about doing some sort of midi to usb conversion and sending midi from the zendrum into the module usb port.  If one of these modules is plugged into a computer, it can receive midi from a sequencing program like Logic or Digital performer so it seems possible.

 on: June 14, 2015, 12:55:55 PM 
Started by Ronnie Balz - Last post by DrumWagon
The manuals would indicate a 'no'.  There is no mention of MIDI IN or playback of recordings made via MIDI OUT.  Perhaps more telling though is there is no MIDI implementation chart.

 on: June 14, 2015, 12:16:49 AM 
Started by Ronnie Balz - Last post by Ronnie Balz
Is there a way to make a zendrum work with the newer modules (Roland TD-25, TD-15, etc) that don't have midi in?  I know Alternate Mode sells midi to usb cables to go directly into your computer.  Could a cable like that go directly into the module to receive midi?

 on: June 14, 2015, 12:14:07 AM 
Started by wb_drumz - Last post by Ronnie Balz
Was wondering the same thing myself.  I asked 2Box Support.  The reply:  "if you can set up the Hihat to MIDI send:
DrumIt Five MIDI note for HIHAT Edge, Bow and the Pedal  + velocity data for these 3 zone ( 1-127)  and finally controller data for open to close, than it should work."

I, unfortunately am not much of a techie (and don't want to be) so I don't really know what that means.  I suspect I could figure it out but I'm not $1200 confident I can, so...

 on: March 31, 2015, 02:51:42 PM 
Started by wb_drumz - Last post by wb_drumz
Hi folks: Is anyone out there using a 2 Box system? I am interested in whether
1: The hi hat issue has been resolved.
2: Does the 2BOX receive Program Change messages.
3: Has anyone imported melodic sounds like bass guitar into the 2 Box system.

It seems out of all the hardware modules, the 2 BOX could be a winner. I know there have been some issues with the hi hat so I thought I'd check in and see. Thanks in advance for all input\observations

Pages: 1 ... 4 5 [6] 7 8 ... 10