Zendrum Forums

Please login or register.

Login with username, password and session length
Advanced search  

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - DrumWagon

Pages: [1] 2 3 ... 25
ZenEdit / Re: contact info for ZenEdit support?
« on: January 08, 2017, 02:22:49 PM »
The contact page is linked from the support page.

Alternatively you can PM me here or on FB

ZenEdit / Re: Adding triggers to ZenEdit
« on: October 04, 2016, 10:01:45 AM »
The help file has a section on 'customizing your zendrum'.  That's the best place to start.

Cool idea!

ZenEdit / Re: How do I know transmit occurred?
« on: May 09, 2016, 10:47:03 AM »
Assuming your Zendrum is connected correctly and that you are using a recognized interface, then the Zendrum screen should have a flashing light while receiving SysEx data.

Some basic troubleshooting tips can be found here http://www.zendrumstudio.com/index.cfm?event=helpIndex#sysexTimeout


Tech Help / Re: Sustain button/switch w/ BFD3
« on: February 16, 2016, 04:48:03 PM »
Technically any CC value can be used, however you should try to use one that doesn't have common usage.  Here are the available values :https://www.midi.org/specifications/item/table-3-control-change-messages-data-bytes-2

What host/daw are you using?  If you have a plugin chain that includes a MIDI filter then another possibility is to convert the CC message into a NOTE ON one.  That way you can map a choke articulation directly in BFD and target one cymbal rather than cutting off all sounds.
If you happen to use REAPER as a DAW then I have a utility I wrote to do just that: http://nebiru.com/drumWagon/page.cfm/ReaperJS


No, the triggers are velocity sensitive only.

Here is a link to the manual http://www.scribd.com/doc/135898841/Zendrum-Z4-Manual-ZX#scribd


I don't have a Zendrum, but... / Re: The Countdown Begins...
« on: June 18, 2015, 11:29:56 PM »
"The waaaiting is the hardest part".

Welcome to the tribe :)

I don't have a Zendrum, but... / Re: modules with no midi in
« on: June 14, 2015, 12:55:55 PM »
The manuals would indicate a 'no'.  There is no mention of MIDI IN or playback of recordings made via MIDI OUT.  Perhaps more telling though is there is no MIDI implementation chart.

Tech Help / Re: Using hatKAT with expression pedal input
« on: February 25, 2015, 06:28:29 PM »
I'd hook up the output to your computer and use MIDI-OX, etc to analyze what's being output.  Does the pedal work when connected directly to the Nord? 
You can also export your SysEx into ZenEdit to check what the calibration settings are for the pedal and try tweaking them.

Tech Help / Re: Using hatKAT with expression pedal input
« on: February 25, 2015, 05:13:28 PM »
If it's a 4.x board, you should try to run the calibration function (outlined in the manual) to set the upper and lower bounds of the pedal sweep.

ZenChat / Re: BFD3 and multiple kits live
« on: November 21, 2014, 12:01:55 AM »
Personally I've built just one giant kit in BFD3 and then use different mappings on my Zendrum to facilitate the different kits.  This way I only load up one BFD project, but I have kits for Rock, Jazz, Brushes, Rods, World and various other combinations within all ready to go.

This is pretty common usage pattern which most folks have been using since the halcyon days of VSTs.  Even the Zendrumdrive uses this approach.

ZenChat / Re: Overcoming skepticism
« on: July 30, 2014, 11:14:47 PM »

ZenEdit / Version 2.7.5 is underway
« on: June 03, 2014, 12:55:28 AM »
The next major version is nearing completion. The focus this time is on adding additional MIDI Out capabilities and also improvements to the note selection workflow. We're also adding module support for several newly released drum brains.

If you have any ideas or requests for new features, now is the time to submit them here!


You can also stay abreast of updates here:


It sounds like you may be using BFD and Kontakt standalone?  Using them within a DAW or VST host should solve your problem.

Tech Help / Re: BFD3, pedals, choke, volume knob
« on: February 16, 2014, 02:21:24 AM »
Panic isn't the same as 'choke', but yeah, that would be another way to go.  Panic will cut off all sounds, while the choke articulation is a smoother cut off and only affects the cymbals tied to it.

Pages: [1] 2 3 ... 25