Zendrum Forums

Please login or register.

Login with username, password and session length
Advanced search  

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Topics - scvkiltie

Pages: [1] 2
ZenEdit / zenedit download problem
« on: September 19, 2012, 03:27:14 PM »
Hi I am attempting to download new version of Zenedit... I get error message #16800
any ideas out there thanks Rob

ZenEdit / zenedit and an apple tablet
« on: November 08, 2011, 09:41:26 AM »
Hello, I was wondering if the Zenedit software will work on an Apple tablet...thanks Rob

Tech Help / midair wireless midi
« on: August 09, 2011, 07:53:52 PM »
Hi. Am I correct in assuming that a Midair wireless midi will not work because the zen drum has no power going to it ?

ZenEdit / program froze had to force quit
« on: February 09, 2011, 08:19:07 PM »
well, the program froze to the spinning color wheel. had to force close... now I am at a total loss....

ZenEdit / new file triggers not showing
« on: February 09, 2011, 08:08:58 PM »
hello, I am attempting this zenedit...I have opened a new file... how ever many of the triggers when pressed on the zendrum do not light up any triggers on the screen... from watching the video, at least all I should have to do is move them to the correct location... but I get nothing... everything is on channel 10... i have also added 2 more triggers which do not light up either...thanks Rob

ZenEdit / 10 days...
« on: February 08, 2011, 09:22:52 AM »
Hello, I have a gig for 400 people in a theatre in 10 days... so I will be needing all the help I can get with this sysex stuff, just a heads up, I'm sure the knowledge base will help me out... this will be video taped... i will make it available, am also looking into wireless mini camera to mount on Zendrum... ala Carlos Santana... Thanks in advance, scvkiltie...

ZenEdit / Hello,I am not getting the line that lets me pick my module...
« on: January 28, 2011, 07:50:34 PM »
Hi, I have the proxy working, now I do not have the option to set my module... this line is non existent.... Thanks Rob

ZenEdit / no midi proxy
« on: January 25, 2011, 07:43:31 PM »
Hello, I am attempting to learn zenedit, now that I have the z4 upgrade, I downloaded and installed the proxy, when I open zenedit, it says midi unavailable, I go to reconnect... I don't get the box that asks what kind of device I have... and the midi stays unavailable... also how do I hook up my drom module to get the sounds when I am changing trigger sounds thru zenedit, I have a Roland 6, thanks, Rob

ZenChat / stick and fingers...
« on: July 11, 2010, 08:19:39 PM »
Hi, anyone else out there using your right hand on e- drums, while using the left hand on the zendrum? for example,paradiddle diddle, paradiddle diddle paradiddle  r stick, left middle finger, 2 r sticks, left middle finger, left index finger, repeat then r stick left middle finger, repeat, I play these to sound like rolls at 132... just curious

Tech Help / bfd2 drum sounds breaking up, doesn't happen with battery 3....
« on: December 09, 2009, 09:19:51 PM »
Hello, I figured out how to load some drums to the zdrum with bfd2, however, at times they screech at the end, or break up, sounding like electrical interference... this does not happen when playing a groove, just when playing a zendrum pad, and it does not happen all the time... secondly, when saving  then loading a kit to the zdrum, will it automatically pick the sounds from bfd2, or does bfd2 also have to load each kit, thanks for the help, scvkiltie

Tech Help / no volume on BFD2
« on: December 08, 2009, 06:05:29 AM »
Hello, I purchased BFD2 yesterday, loaded it on my Macbook.... opening drum set appeared.. very cool, however, only 1 cymbal plays when clicking on all the cymbals and drums. I loaded a groove, once again it plays, but no volume? I turned up the master gain, but no help, I'm thinking it's a simple fix for an experienced user, however, I'm not there yet, Thanks, scvkiltie

ZenChat / mapping zdrum with ultrabeat
« on: November 29, 2009, 08:54:30 AM »
Hello, I am attempting to use Logic Ultrabeat to map the zdrum, but no luck so far, has anyone else had success?, thanks, Scvkiltie

Tech Help / using zendrum as a controller for synthesizer
« on: September 06, 2008, 02:52:22 PM »
Hello all, I have a question about using a synth to produce the sounds played by the zendrum... my problem is that the synth only has a midi out, while the zendrum requires a midi in into the synth... is there a device that will convert the out to in ??? Could I possibly use Battery 3 or garage band and use the synth as a plug in, and then control the synth this way... Thanks, Rob

ZenChat / one handed zenning
« on: August 29, 2008, 04:59:38 PM »
Hello all, just thought I'd share my metamorphisis over the past few months... Battery 3 is sorta workin out, still can't figure out midi numbers and placings, but I have found an instructional dvd on Battery 3 that should really help.. will do a review when I get it. so now my live set up is as follows: right hand with stick plays the Roland spd-20, and the left hand plays the Zendrum, I also use a bass pedal going thru the Roland. People go nuts when they see this setup... the Roland is clamped to a heavy duty music stand... Zendrum is velcroed to a synth stand that I have custom reworked... Zendrum can be removed and slung on in a couple of seconds.. now for my question, on some of the Roland sets, the Zendrum drum set sounds stay the same on the left, however pads on the right some times mimmick the chordal sounds put out by the Roland ? If any one could help me put 23 sounds from the Roland into the Zen for a set up I would really be thankful, I will include a few pictures of this bad boy in a couple of days, scvkiltie

Tech Help / Battery 3 new set questions
« on: May 06, 2008, 07:13:41 PM »
Hello zenners... I have a few questions about battery 3... when creating a new set from scratch, once I assign the first trigger to the Zen no problem, however when I add another trigger, the first trigger also fires when the second trigger is pressed, I think it's in options, but I cannot find it.. sometimes 2 cells will light up, don't know why... secondly, when rearranging sounds in a loaded kit, how would you assign a sound to position A1? They seem to light up in haphazard areas, sometimes 2 or 3 cells will fire, and I cannot separate them... thirdly, how do give a cell 3 or 4 different sounds... perhaps I just need someones list of what is checked and unchecked... finally how do you make a loop start with 1 trigger tap and continue until the same trigger is pressed... this is a lot and thanks for all your help... Rob

Pages: [1] 2